There are many factors to consider when deciding which size water heater to purchase. One of the most important factors is the amount of hot water your family uses on a daily basis. Another factor is the size of your home.
If you have a large home with multiple bathrooms, you will need a larger water heater. The most common sizes for residential water heaters are 3500 watts and 4500 watts. So, which one is right for you?
If you have a small family and your home is on the smaller side, a 3500-watt water heater will likely be sufficient. If you have a larger family or your home is on the larger side, a 4500-watt water heater will be a better choice.
Can I replace a 3500-watt water heater with a 4500-watt one?
Yes, you can replace a 3500-watt water heater with a 4500-watt one. The 4500-watt water heater will cost you more to operate though.
See also: Are Glass Lined Water Heaters Better
Is a 4500-watt water heater more efficient?
A 4500-watt water heater is more efficient than a standard water heater because it uses less energy to heat the water. The 4500-watt water heater uses less energy because it has a lower wattage. The lower wattage means that the 4500-watt water heater uses less electricity to heat the water.
The 4500-watt water heater also has a lower water heater temperature. The lower water heater temperature means that the 4500-watt water heater uses less energy to heat the water. The 4500-watt water heater is also more efficient because it has a higher Energy Factor.
The higher Energy Factor means that the 4500-watt water heater uses less energy to heat the water.
What size breaker do I need for a 3500-watt water heater?
If you have a 3500-watt water heater, you will need a breaker that is at least 40 amps. This is because the water heater will require a circuit that is at least 30 amps, and the breaker will need to be able to handle the additional load.
What wattage water heater do I need?
If you’re wondering what wattage water heater you need, the answer depends on a few factors. First, you’ll need to know the size of your hot water tank. The average hot water tank is 40 gallons, but tanks can range in size from 20 to 80 gallons.
Once you know the size of your tank, you can calculate the wattage you need by using this formula: (Tank size in gallons) x (Watts per gallon) = Wattage needed For example, if you have a 40-gallon tank, you would need a 1,500-watt heater.
Now that you know the basics of calculating wattage, there are a few other factors to consider that can affect the size of the heater you need. If you live in an area with a colder climate, you’ll need a heater with a higher wattage.
Conclusion
If you’re considering upgrading your water heater, you may be wondering what the difference is between a 3500-watt and 4500-watt model. The answer lies in the amount of water that each model can heat. A 3500-watt water heater can heat around 40 gallons of water per hour, while a 4500-watt model can heat up to 60 gallons per hour.
This means that if you have a family of four, a 4500-watt model will be able to keep up with your hot water needs better than a 3500-watt model. So, if you’re looking for a water heater that can handle a larger family’s hot water needs, a 4500-watt model is the way to go.
You Can Also Read: