If your Bradford White water heater pilot light keeps going out, there are a few possible causes. The most common cause is a dirty or faulty thermocouple. The thermocouple is a sensor that tells the gas valve when to open and close.
If it gets dirty, it can cause the pilot light to go out. You can clean the thermocouple with a wire brush. If that doesn’t work, you may need to replace it.
Why does my water heater pilot keep blowing out?
If you have a water heater with a pilot light that keeps going out, there are several possible reasons. The most common reason is that the pilot light is not getting enough air. The pilot light needs a steady supply of air to stay lit, and if there is not enough air flowing around it, the pilot light will go out.
Another possible reason is that the pilot light is dirty. If the pilot light is covered in soot or dirt, it will be more difficult for it to stay lit. You can clean the pilot light with a wire brush or a can of compressed air.
If the pilot light keeps going out, it’s important to troubleshoot the problem so that you can keep your water heater running safely and efficiently.
What would cause a pilot light to keep going out?
There are a few reasons that a pilot light might keep going out. One reason is that there is a draft coming from somewhere that is blowing the pilot light out. Another reason could be that the gas valve is not turned on all the way, so not enough gas is getting to the pilot light.
Finally, the pilot light itself could be dirty, which would cause it to go out more easily.
See also: Big Buddy Heater Fuel Consumption
Why does my Bradford White water heater keep shutting off?
If you have a Bradford White water heater, you may have noticed that it keeps shutting off. There are a few reasons why this may be happening.
One reason could be that the thermostat is set too low.
The thermostat controls the temperature of the water in the tank. If it is set too low, the water will cool down and the heater will shut off.
Another reason could be that the pilot light is out.
The pilot light ignites the gas that heats the water in the tank. If it goes out, the gas will stop flowing and the heater will shut off.
Finally, the water heater may be shutting off because it is overheating.
This can happen if the water in the tank is not being used and the heater is not being turned off. The water will eventually get too hot and the heater will shut off to prevent damage.
How do you fix a water heater pilot that won’t stay lit?
If your water heater pilot won’t stay lit, there are a few things you can do to try to fix the problem. First, make sure that the pilot light is properly aligned. If it is not, then you can try adjusting it.
If that doesn’t work, then you may need to clean the pilot light assembly. Sometimes dirt or debris can build up and prevent the pilot light from staying lit. You can use a toothpick or a cotton swab to clean out the pilot light assembly.
If that doesn’t work, then you may need to replace the pilot light assembly.
Conclusion
If you’re having trouble with your Bradford White water heater pilot light going out, you’re not alone. Many people have this problem and it can be frustrating. There are a few things you can try to fix the problem.
First, make sure the pilot light is clean and the area around it is free of debris. Sometimes dirt and dust can build up and cause the pilot light to go out. Second, check the gas line to make sure there are no leaks.
If there are, you’ll need to repair the leak before the pilot light will stay lit. Finally, make sure the thermocouple is in good working order. The thermocouple is what senses the temperature of the pilot light and turns the gas off if the pilot light goes out.
If it’s not working properly, it could be the reason the pilot light keeps going out.
You Can Also Read