Hey, What’s Up! are you trying hard to find a detailed guide on How To Turn On Jayco Water Heater? Here’s the solution!
Jayco is a popular and trusted manufacturer of travel trailers, they offer all the types of necessary tools and appliances for every type of recreational vehicle.
The water heater offered by the brand might be a little challenging task to turn on if you’re new to travelling with their plan. By reading this post, you’re not only going to know how to do that but you can also know the basics of their water heater.
Let’s jump into the content!
How To Turn On Jayco Water Heater?
By default, Jayco offers a gas-powered heater with two gas tanks with their vehicle. So the first thing you need to do is check which gas water unit you want to turn on that’s indicated by the blue valve up.
After that, you can switch that from side to side depending on which bottle you want to use. For example, if you want to use the first one, open the valve and push down the release valve to allow gas to flow in through the pipes and also into the appliances.
Once you turn your gas on, find the water switch inside your van and turn it on. If you first turn on that switch, you’ll notice that the red light is illuminated but it is for a short period while the system gets ready to ignite, and once it ignites the red light will automatically turn off and remain off.
Note: if the red light does come back, there might be something wrong with the heater, you’ll need to call an expert to fix the issue before using it.
Now come to the backside of the heater and open the box and look at the bottom left-hand corner, there’s a tiny switch within the unit, so turn on the button.
Your Jayco water heater is turned on now, however, make sure that you have turned it off once the water is heated at your preferred temperature.
Tips on Using Your Jayco Water Heater:
In this section, we’re going to share some tips with you that will keep your water heater functioning properly throughout the camping season.
Safety When Draining the Tank:
When it comes to using an electric or gas-powered tool, you should make sure that you’re maintaining enough safety to stay safe from such tools.
In the case of draining up a Jayco water heater,
- You should turn off the water heater and the pump. Turned off the LP gas by closing the valve on the tank.
- Make sure your coach is unplugged from shore power and all power is off.
- Turn off the water leading to your coach and then open up the faucet to the sink closest to the heater to drain the tank.
Bonus Tips: Wearing a safety glass would be the work of an ideal person!
Burner Flue and Clumber Cleaning:
One of the issues you may face at the campground is a clogged flue. The flue on your water heater tends to attract bugs or maybe even spiderwebs get clogged up.
We’ll suggest blowing out the flu. You can use some sort of air hose to get the air inside of the flue to blow out all of the debris that’s inside of it.
It’s also a good idea to blow out the chamber itself. We also encourage you to blow away from the orifice as that could cause some clogging and lead to further problems down the road.
How to Adjust The AirFlow To The Burner Flue On A Jayco Water Heater?
If you hear an unexpected roaring sound from your water heater, probably it means that too much air is going through the airflow valve from the LP gas tank.
To solve the issue, you can adjust that to reduce the roar. simply adjust the airflow into the tank so you loosen the setscrew about a quarter of a way back then slide that so that the flow itself is reduced.
The proper flow will help to:
- Eliminates the roaring sound.
- Reduce the likelihood that you’ll see any charring dark colour on the top or outside of your coach.
Leaking Pop-Off Valve:
When you open the Jayco water heater compartment and notice some leaking or some seeping of water out of your TMP valve or your pop-up valve, don’t be concerned.
Because this doesn’t mean that the valve is defective, the air might be absorbed into the valve by the water itself.
You can open the pressure valve to allow for some air to get back into the valve that will set the pocket, it will also eliminate the dripping or the CP.
How To Turn On Hot Water Heater In Jayco Camper?
You’ll have two buttons on the front side of the Jayco water heater, turn on the white button. beside that button, a red light will con on and when the red light goes out means the hot water has lit.
Although all the Jayco water heater on/off buttons are not the same, however, the process is the same. Once you turn on the button, it will take up to 15 minutes to heat the water.
Final Verdict :
Hope the entire guide was enough to provide you with a detailed guide on how to turn on the Jayco water heater.
Although the topic was simple, some people still think that using a water heater in an RV is a complex thing but they should know that the process is almost like your home system.
You can turn the water heater by following the shared guide and of course by yourself without calling an expert. The given tips also might work as bonus points for your journey!
Also Read:
