If you have a Rinnai tankless water heater, you may have noticed a red light on the control panel. This is called the priority light and it indicates that the unit is not receiving enough power to operate. This can be caused by a number of factors, including a tripped circuit breaker or a faulty power cord.
In most cases, the problem can be resolved by resetting the breaker or replacing the power cord. However, if the problem persists, you may need to call a qualified technician to service your unit.
If you have a Rinnai tankless water heater, you may have noticed a little green light on the front of the unit. This light is called the priority light, and it indicates that the unit is in standby mode. When the priority light is lit, it means that the unit is ready to provide hot water on demand.
The priority light will also blink when there is a demand for hot water and the unit is heating up to meet that demand. If you see the priority light blinking, it’s important to not turn off or disconnect your Rinnai tankless water heater until the green light comes back on solid again. Doing so could result in serious damage to your unit.
MC91 2 Controller Instructional Use Video
How Do You Display Rinnai Error Codes?
If your Rinnai tankless water heater is giving you an error code, there are a few things that you can do in order to try and troubleshoot the problem. First, check the manual that came with your unit in order to find the specific meaning of the error code that you are seeing. Once you have done this, there are a few different things that you can try in order to fix the issue.
One thing that you can do is to check all of the connections on your unit and make sure that they are tight and secure. Another thing to check is the gas line leading to your unit – if there is a leak, this could be causing the error code. Finally, if none of these solutions work, you may need to call a professional for help troubleshooting your Rinnai tankless water heater.
Is There a Reset Button on a Rinnai Tankless Water Heater?
If your Rinnai tankless water heater isn’t working properly, you may be able to reset it using the unit’s built-in controls. To do this, first make sure that the power to the unit is turned off. Then, locate the reset button on the control panel.
It may be labeled “RESET” or have a red triangle icon next to it. Press and hold the reset button for three seconds, then release it. This should reset the unit and allow it to function properly again.
How Do You Ignite a Rinnai Tankless Water Heater?
If your Rinnai tankless water heater won’t ignite, there are a few things you can check before calling a technician. First, make sure there is a gas supply to the unit and that the shut-off valve is open. Next, check the power supply and circuit breaker.
If everything looks good there, the problem may be with the igniter itself. You can try resetting it by pressing the reset button on the control panel. If that doesn’t work, you may need to replace the igniter.
Does a Rinnai Tankless Water Heater Have a Pilot Light?
Rinnai tankless water heaters do not have a pilot light. Instead, they use an electronic ignition to start the heating process. This makes them more energy efficient than traditional tank water heaters, which use a pilot light to keep the water heated.
Credit: www.home-water-heater.com
Yellow Priority Light on Tankless Water Heater
If you have a tankless water heater, you may have noticed a yellow light on the front of the unit. This is the priority light, and it indicates that the unit is in standby mode. When the priority light is on, it means that the unit is not providing hot water to your home.
There are a few reasons why your tankless water heater may be in standby mode. One reason could be that the temperature setting on the unit is set too low. The minimum temperature for most tankless water heaters is 120 degrees Fahrenheit (49 degrees Celsius).
If your unit is set below this temperature, it will go into standby mode.
Another reason why your tankless water heater may be in standby mode is because there is no demand for hot water. This could be because everyone in your household is away at work or school during the day.
Tankless water heaters only provide hot water when there is a demand for it. If there is no demand, the unit will go into standby mode to conserve energy.
If you think either of these reasons could be why your tankless water heater is in standby mode, simply adjust the temperature setting or wait until there is a demand for hot water before turning on the unit.
Rinnai Priority Button Yellow
If you have a Rinnai tankless water heater, you may have noticed a yellow button on the front of the unit. This button is called the priority button, and it’s used to prioritize which appliances get hot water first.
If you press the priority button, it will send hot water to that appliance first, before any other appliances in your home.
This can be helpful if you’re in a hurry and need to get hot water right away. Just keep in mind that if you use the priority button too often, it could shorten the lifespan of your Rinnai unit.
Rinnai Tankless Water Heater Priority Button
If you have a Rinnai tankless water heater, you may have noticed a button on the control panel marked “Priority.” What is this button for?
The Priority button is used to give the water heater priority over other appliances that use hot water.
When the button is pressed, the water heater will preheat the water so that it’s ready as soon as you need it. This can be helpful if you know you’ll be using a lot of hot water and want to make sure there’s enough available.
To use the Priority button, simply press it and then turn on your faucet or appliance.
The water heater will start heating the water right away. Once the water reaches the desired temperature, the Priority light will turn off automatically. You can then use hot water as usual.
Keep in mind that using the Priority button will increase your energy usage, so only use it when necessary. It’s also a good idea to press the button a few minutes before you actually need hot water to allow time for the waters to heat up fully.
Conclusion
The Rinnai tankless water heater comes with a priority light that helps to indicate when the unit is working properly. If the light is on, then the unit is operating correctly and if the light is off, then there may be an issue with the unit. The priority light is a helpful feature that can help to ensure that your Rinnai tankless water heater is working properly.