If you’re getting an E1 error code on your Magnavox Infrared Heater, it means that the unit is not receiving enough power. This can be caused by a number of things, including a blown fuse or a tripped circuit breaker.
If you suspect that the problem is with the power supply, first check to see if the fuse has blown. If it has, replace it with a new one and see if that fixes the problem. If not, then the next step is to check the circuit breaker. If it has tripped, simply reset it and see if that does the trick.
If neither of those solutions works, then the problem is likely with the heater itself and you’ll need to contact customer service for further assistance.
What Is The Magnavox Infrared Heater E1 Code?
If your Magnavox infrared heater is displaying the E1 code, it means that the room temperature is too low for the heater to operate. The ideal operating temperature for your heater is between 50-90 degrees Fahrenheit. If the room temperature is below 50 degrees, the E1 code will appear on the display.
To fix this, simply raise the temperature of the room to above 50 degrees. You can do this by turning on the heater, opening a window, or adding a space heater to the room. Once the room is above 50 degrees, the E1 code will disappear and your heater will be able to operate normally.
How Can I Fix The Magnavox Infrared Heater E1 Code?
If your Magnavox infrared heater is displaying the E1 code, it means that the unit is not receiving enough power. To fix this, you’ll need to check the power cord and make sure it’s plugged into a wall outlet. If it is, then you’ll need to check the circuit breaker and make sure it’s not tripped. If it is, simply flip it back on and the unit should start working again.
What Causes The Magnavox Infrared Heater E1 Code?
If you’re getting the Magnavox Infrared Heater E1 code, it means the unit is overheating. This can be caused by a few different things:
1. The unit is in a confined space – Make sure the unit has enough clearance around it and is not blocked in by furniture or other objects.
2. The filter is dirty – A dirty filter can restrict air flow and cause the unit to overheat. Clean or replace the filter as needed.
3. The vents are blocked – Check the vents on the unit and make sure they’re not blocked by dust or other debris.
4. The room is too cold – Believe it or not, if the room temperature is too cold, the unit can overheat trying to heat up the space. Raise the room temperature a few degrees and see if that clears the error code.
If you’re still getting the E1 code after trying these things, give Magnavox customer service a call for further troubleshooting.
Is The Magnavox Infrared Heater E1 Code Dangerous?
If your Magnavox infrared heater displays an E1 code, it means that the room temperature is too low for the heater to operate. This is not a dangerous situation, but it can be uncomfortable if you’re trying to use the heater to warm up your home.
There are a few things you can do to fix this problem:
1. Raise the temperature of the room. If the room is too cold, the heater won’t be able to work properly. Try turning up the thermostat or opening a window to let some warm air in.
2. Check the heater’s settings. Make sure the heater is set to the correct temperature. If it’s set too low, it won’t be able to heat the room properly.
3. Move the heater to a different location. If the heater is in a cold spot in the room, it won’t be able to heat the area properly. Try moving it to a different spot, such as near a window or door.
4. Contact customer service. If you’ve tried all of the above and the E1 code continues to appear, there may be something wrong with the heater. Contact Magnavox customer service for help.
If you are still having questions about the “magnavox infrared heater e1 code”, please feel free to leave a comment below.