If your water heater is more than 20 years old, chances are it has a pilot light. While a pilot light is an effective way to keep your water heater lit, it can be a hassle. If you’re tired of having to deal with a pilot light, you may be wondering if you can convert it to electronic ignition.
There are a few things you need to consider before you make the switch. First, you need to make sure your water heater is compatible with electronic ignition. Second, you need to decide if you’re going to do the conversion yourself or hire a professional.
If you’re not sure if your water heater is compatible with electronic ignition, the best thing to do is to contact the manufacturer. They should be able to tell you if your water heater can be converted. If you’re going to do the conversion yourself, there are a few things you need to keep in mind.
Can I replace a pilot light with electronic ignition?
If your home has a natural gas or propane-fueled furnace, water heater, or other appliance, chances are it has a pilot light. A pilot light is a small, constant flame that’s used to ignite the main burner on your appliance. While pilot lights are generally reliable, they can go out from time to time.
If your pilot light goes out, you may be able to relight it yourself. But in some cases, it’s best to call a qualified technician to service your appliance.
There are two types of pilot lights: standing pilots and intermittent ignition pilots.
Standing pilots are always lit, while intermittent ignition pilots only light when the appliance is in use. Intermittent ignition pilots are more common in newer appliances.
If you have a standing pilot light, relighting it is a relatively simple process.
First, locate the pilot light assembly on your appliance. This is usually located near the main burner.
See also: Comfort Zone Heater Wiring Diagram
Can you manually light a water heater with the electronic pilot?
If your water heater has an electronic pilot, you can still manually light it if needed. Here’s how:
First, locate the pilot light assembly on your water heater.
It will be near the bottom of the unit, and will have a small knob or lever that you can turn.
Once you’ve found the pilot light assembly, turn the knob or lever to the “off” position. Then, wait a few minutes for the gas to clear from the area.
Once the gas has cleared, turn the knob or lever to the “pilot” position. Then, use a long match or lighter to light the pilot light. Hold the flame to the pilot light for 30 seconds or so, until the pilot light ignites.
Once the pilot light is lit, you can turn the knob or lever to the “on” position, and your water heater will operate as usual.
How do you light a gas water heater with an electric ignition?
If your gas water heater has an electric ignition, there are a few things you need to do in order to light it. First, make sure that the power is turned on to the unit. Next, locate the pilot light knob and turn it to the “on” position.
You will then need to press and hold the igniter button until the pilot light ignites. Once the pilot light is lit, you can release the button and turn the knob to the “off” position.
Is electronic ignition better than pilot light?
There are a few key reasons why electronic ignition is often seen as being better than pilot light ignition for gas fires. One of the main reasons is that electronic ignition doesn’t require a constant flame to be present in order to work, meaning that there is less of a risk of gas leaks.
Another advantage of electronic ignition is that it is often much easier to light than a pilot light system.
This is because you simply need to push a button or turn a switch to start the ignition process, rather than having to hold a lighter to a pilot light for a minute or so.
Finally, electronic ignition systems tend to be much more reliable than pilot light systems. This is because there are fewer moving parts that can break or become damaged over time.
Overall, then, electronic ignition is often seen as being the better option for gas fires.
Conclusion
If you have an older water heater with a pilot light, you may want to consider converting it to electronic ignition. This can be done relatively easily and will save you money in the long run.
electronic ignition is more efficient than a pilot light, and thus will save you money on your energy bill.
converting your water heater to electronic ignition is relatively simple and can be done in a few steps.
Overall, converting your water heater to electronic ignition is a great way to save money and make your appliance more efficient.
You Can Also Read: